Atman Systems



MEP



Range Of Products



Fire Fighting




More Details

MEP




More Details

HVAC




More Details

Oil & Gas




More Details

MEP



U bolt with Lining





APPLICATION
U-BOLTS are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt can provide vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.

CONSTRUCTION
U-Bolt is provided with two standard hex nuts and has a longer straight threaded length.



Approvals: UL Listed ANSI/MSS SP-58 & SP-69(Type 24) Federal Specification WW-H-171E & A-A-1192A (Type 24) Type: WIth LIning

Material: Mild Steel. Also other materials can be provided on request Half perimeter is coverd with EPDM tube

Sizes: Min - 1/2" | Max - 36"

Max Temp: -

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Max Load: As per Size

Min Load: As per Size



Slotted Channel





APPLICATION
Mechanical Application: Piping Racks, Tunnel Pipe Stanchions, Concrete Inserts, Beam Attachments, Pipeline Height Adjustment Electrical Application: Pipe & Conduit Supports, Raceway Systems, Lighting Fixture,Cable Tray Supports, Beam Adjustments Industrial Application: Racks and Shelving, Partitions, Trolley Systems, Production Line Supports, Wall Framing.

CONSTRUCTION
The Slotted Channel has been designed to provide a versatile and economical solution to industrial framing and support problems.



Type: Strut Accessories

Material: Mild Steel / Stainless Steel

Sizes: Min - 1.5mm | Max - 2.5 mm

Finish: Pre Galvanized /HDG/ Stainless Steel



Threaded rod





APPLICATION
To support Ducting System , Piping rack For hanging Supports (Clevis Hanger, Sprinkler Hanger, etc) For hanging Anti-vibration Products (Spring hanger, Duct mount, Etc)

CONSTRUCTION
Made up of cold-rolled wire rod coil, having an external thread



Approvals: All Standard & Grades available

Type: Fastener

Material: Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

Sizes: Min - M6 (1/4"UNC) | Max - M72 (3""UNC)

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

Max Load: As per Size

Min Load: As per Size



Pipe Hanger with EPDM Lining





APPLICATION
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.

CONSTRUCTION
PIPE HANGER with EPDM lining consists of a piece of mild steel shaped to wrap around the pipe. The selection of the proper PIPE HANGER WITH EPDM LINING depends upon the load to be carried. Permits installation before and after the pipe is in place. Reduces noise up to 18 dB.



Approvals: FM Approved & UL listed

Type: With EPDM lining, With lining-heavy duty, Easy fix pipe hanger with EPDM lining

Material: Mild Steel. Also other materials can be provided on request

Sizes: Min - 1/2" | Max - 3"

Max Temp: -20°C 110°C

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake & Epoxy Coated.

Max Load: As per Size

Min Load: As per Size



Wedge Anchor





APPLICATION
For Fixing support in concrete.

CONSTRUCTION
Wedge Anchors are installed into a pre-drilled hole, then the wedge is expanded by tightening the nut to securely anchor into the concrete.



Approvals: ETA

Type: Anchor

Material: Carbon Steel

Sizes: Min - All sizes | Max - Customization available Finish: Electrogalvanized, Hot dip Galvanized & Zinc Flaked

Max Load: As per Size

Min Load: As per Size



Contact Number: 89834 23404 / 94235 78068



Atman Systems

Near Shahu Garden, G Block, MIDC Shahunagar, Chinchwad
Pune - 411019


@2024 ATMAN SYSTEMS All Rights Reserved