Atman Systems



Oil & Gas



Range Of Products



Fire Fighting




More Details

MEP




More Details

HVAC




More Details

Oil & Gas




More Details

Oil & Gas



Two Bolt Clamp





APPLICATION
TWO BOLT PIPE CLAMPS is pipe lines or hot lines where no insulation is required. recommended for suspension of cold

CONSTRUCTION
TWO BOLT PIPE CLAMPS consists of two mild steel flat bars bent to shape and held together by two bolts.



Approvals: ANSI/MSS SP-58 & SP-69(Type 4) Federal Specification WW-H-171E & A-A-1192A (Type 4)

Type: Pipe Hanger

Material: Mild Steel. Also other materials can be provided on request

Sizes: Min - 1/2" | Max - 36"

Max Temp: 343°C (650°F)

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Max Load: As per Size

Min Load: As per Size



Shoe clamp





APPLICATION
Design for use on pipe lines containing expansion joints or other critical components where lateral pipe movement needs to be controlled

CONSTRUCTION
consists of two mild steel flat bars bent to shape and held together by two bolts, welded with base plate & vertical plates



Type: Pipe Hanger

Material: Mild Steel

Sizes: Min - 2" | Max - 32"

Finish: Black, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.



U bolt with Lining





APPLICATION
U-BOLTS are used to secure piping to structural members. When the piping is below the structural member, the U-Bolt can provide vertical support and restricts lateral movement while allowing for axial movement. When the piping system is above the structural member, the U-Bolt restricts lateral movement and upward movement while allowing axial movement of the piping.

CONSTRUCTION
U-Bolt is provided with two standard hex nuts and has a longer straight threaded length.



Approvals: UL Listed ANSI/MSS SP-58 & SP-69(Type 24) Federal Specification WW-H-171E & A-A-1192A (Type 24) Type: WIth LIning

Material: Mild Steel. Also other materials can be provided on request Half perimeter is coverd with EPDM tube

Sizes: Min - 1/2" | Max - 36"

Max Temp: -

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized & Zinc Flake.

Max Load: As per Size

Min Load: As per Size



U strap





APPLICATION
A standard pipe strap is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural beams, for limiting pipe movements due to thrust loads during sprinkler system start-up.

CONSTRUCTION
A standard Pipe Strap consists of a piece of mild steel shaped to hold the pipe down to walls or ceilings



Approvals: UL Listed & FM Approved ANSI/MSS SP-58 & SP-69 (Type 26) Federal Specification WW-H-171E & A-A-1192A (Type 26)

Type: Pipe Hanger

Material: Mild Steel. Also other materials can be provided on request

Sizes: Min - 1/2" | Max - 24"

Max Temp: 343°C (650°F)

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, & Epoxy Coated Max

Load: 500

Min Load: 2300



Pipe Roller with socket





APPLICATION
PIPE Roller with socket is recommended to support pipes in applications where horizontal movement, due to expansion and contraction will occur.

CONSTRUCTION
It is a casting material with socket bolt attachment for full threaded stud.



Approvals: ANSI/MSS SP-58 & SP-69(Type 45) MSince S1924 SR Federal Specification WW-H-171E & A-A-1192A (Type 44)

Type: Pipe Hanaager

Material: Malleable Iron. Mild Steel. Sizes: Min - 2" | Max - 30"

Finish: Plain, Electro-Galvanized & Hot Dip Galvanized & Zinc Flake.



Contact Number: 89834 23404 / 94235 78068



Atman Systems

Near Shahu Garden, G Block, MIDC Shahunagar, Chinchwad
Pune - 411019


@2024 ATMAN SYSTEMS All Rights Reserved