Atman Systems



Fire Fighting



Range Of Products



Fire Fighting



Sprinkler Hanger





Application
A SPRINKLER HANGER recommended providing vertical support to non-insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered

Construction
A SPRINKLER HANGER consists of a piece of mild steel shaped to support pipe. provides double thickness at the support. suitable for fire extinguishing pipe installation.



Approvals: UL Listed & FM Approved ANSI/MSS SP-58 & SP-69(Type 10) Federal Specification WW-H-171E & A-A-1192A(Type 10)

Type: Pipe
Hanger Material: Mild Steel. Also other materials can be provided on request
Sizes: Min - 3/4" | Max - 8"
Max Temp: 343°C(650°F) Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake & Epoxy Coated Max
Load: 220 Min Load: 1300



Clevis Hanger





APPLICATION
A CLEVIS HANGER provides for sizeable and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.

CONSTRUCTION
A CLEVIS HANGER is made up of 2 pieces of mild steel shaped to support pipe which is connected with each other with help of a nut & bolt. provides double thickness at the support. suitable for fire extinguishing pipe installation.



Approvals: ANSI/MSS SP-58 & SP-69(Type 1) Federal Specification WW-H-171E & A-A-1192A(Type 1)

Type: Pipe Hanger Material: Mild Steel. Also, other materials can be provided on request

Sizes: Min - 1/2" | Max - 30” Max Temp: 343°C(650°F) Finish: Plain, & Epoxy Coated. Electro-Galvanized, Hot Dip Galvanized, Zinc Flake

Max Load: As per Size

Min Load: As per Size




Slotted Channel





APPLICATION
Mechanical Application: Piping Racks, Tunnel Pipe Stanchions, Concrete Inserts, Beam Attachments, Pipeline Height Adjustment Electrical Application: Pipe & Conduit Supports, Raceway Systems, Lighting Fixture,Cable Tray Supports, Beam Adjustments Industrial Application: Racks and Shelving, Partitions, Trolley Systems, Production Line Supports, Wall Framing.

CONSTRUCTION
The Slotted Channel has been designed to provide a versatile and economical solution to industrial framing and support problems.



Type: Strut Accessories

Material: Mild Steel / Stainless

Steel Sizes: Min - 1.5mm | Max - 2.5 mm

Finish: Pre Galvanized /HDG/ Stainless Steel



Threaded rod





APPLICATION
To support Ducting System , Piping rack For hanging Supports (Clevis Hanger, Sprinkler Hanger, etc) For hanging Anti-vibration Products (Spring hanger, Duct mount, Etc)

CONSTRUCTION
Made up of cold-rolled wire rod coil, having an external thread



Approvals: All Standard & Grades available

Type: Fastener

Material: Mild Steel, Carbon Steel, Alloy Steel & Stainless Steel.

Sizes: Min - M6 (1/4"UNC) | Max - M72 (3""UNC)

Finish: Plain, Electro-Galvanized, Hot Dip Galvanized, Zinc Flake, Yellow, Cadmium & Nickel.

Max Load: As per Size Min Load: As per Size



Drop in Anchor





APPLICATION
For fixing threaded rod/stud in a Ceiling or concrete slab for providing Ducting support, Piping Rack.

CONSTRUCTION
A Drop-In Anchor is a low profile, female threaded anchor suitable for use with machine bolts of any length or with a threaded rod.



Approvals: ETA

Type: Anchor

Material: Mild Steel / Stainless Steel

Sizes: Min - M6 | Max - M16

Finish: Electrogalvanized Max

Load: As per Size Min Load: As per Size



Contact Number: 89834 23404 / 94235 78068



Atman Systems

Near Shahu Garden, G Block, MIDC Shahunagar, Chinchwad
Pune - 411019


@2024 ATMAN SYSTEMS All Rights Reserved